Taking The Ecg Measurement - Beurer BM 95 Gebrauchsanweisung

6.2 Taking the ECG measurement

There are three different methods of taking the measurement. Start with measurement method A, "right
index finger–chest". If this method does not deliver measurements, or delivers only unstable measure-
ments ("EE" is frequently displayed), switch to method B "left index finger–chest" and, if necessary,
to method C "left hand–right hand".
The most suitable method/procedure depends on the heart configuration (shape of the heart) of each
individual user. If it is not possible to take stable measurements using a given measurement method,
this could have a harmless cause such as the shape of the heart. However, the cause may also be
an illness or disease.
Measurement method C offers maximum comfort, but offers a much lower measurement sta-
bility than methods A or B.
1. Insert the ECG stick cable into the connection for the ECG stick on the main unit.
2. Briefly press the activation switch on the ECG stick to switch on the device.
3. Press and hold the memory button M for 3 seconds to select the desired user memory (
44
or ).