Correct Disposal Of This Product - yeedi vac 2 pro Bedienungsanleitung

To satisfy RF exposure requirements, a separation distance of
20 cm or more should be maintained between this device and
persons during device operation.
To ensure compliance, operations at closer than this distance is
not recommended. The antenna used for this transmitter must
not be co-located in conjunction with any other antenna or
transmitter.
To disable Wi-Fi module on Robot, powerthe robot ON.
Place the robot on the Docking Station making sure the
Charging Contacts on Robot and the Docking Station Pins make
a connection.
Press and hold the AUTO Mode Button on the robot for 20
seconds until Robot emits 3 beeps.
To enable Wi-Fi module on Robot, power the robot OFF and
then power ON. The Wi- Fi module is turned on when Robot is
restarted.
6
EN
Class II
Short-circuit-proof safety isolating
transformer
Switch mode power supply
For indoor use only
Direct current
Alternating current
For EU Countries
For EU Declaration of Conformity information, visit https://www.
yeedi.com/support

Correct Disposal of this Product

This marking indicates that this product should not be disposed
of with other household waste throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To recycle your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can safely
recycle this product.
Temperature
Working
Humidity
Temperature
Storage
Humidity
Service Life
-5-40℃
5%-95%
-5-40℃
5%-95%
5 years