Dantherm simplify Schnellinstalationsanleitung Seite 24

SIMPLIFY® Monitoring Control System
1
SCAN all the components QR-code in the order as shown:
2
!
If CDT's are fitted with Integration Box
NOTE
• Scan the QR code on the CDT, name it and press ADD or +.
If Simplify CC4 box is used:
• Scan the QR code on the box, name it and press ADD or +
When all components are scanned and named:
• Press "Control Unit"
• "Register"
!
If no registration is made within 12 hours, the GSM connection will be disconnected. After this,
continued use requires that 230V be disconnected and reconnected, after which the control unit
NOTE
restarts.
Check installation at:
Enter username and password
Android 5.1 or later version
IOS10 or later version
1
Control Unit
2
Sensor Box
3
Relay Box
https://simplifyclimatesolutions.com
Download APP
"Dantherm Simplify"
1A:
• Name Control Unit
• Press "SENSORS"
2A:
• Name all Sensor Boxes
+
• Press ADD or
3A:
(same tab as "SENSORS")
• Name all Relay Boxes
+
• Press ADD or
Control Unit
Dashboard
25