Teka RLF 74910 GBK Bedienungsanleitung Seite 16

Super cool mode
Press the button
cool mode. Icon
mode will start after locking, exit quick cooling
automatically after 150 minutes by default or
press " " key to exit the super cool mode.
Quick cool exits for 2.5h.
Super freeze mode
Press the button
freeze mode. Icon
freeze mode will start after locking, exit the
quick-freezing mode by default or press "
" key to exit the super freeze mode. Quick
freeze exits for 26h.
Temperature setting of refrigerating
chamber
Press temperature adjusting button of the
refrigerating chamber
chamber region will make flashing indication.
Then press the button
the temperature, and will hear one beep.
Setting scope is between 2°C and 8°C.Every
time you press the button, the temperature will
change 1°C. After adjusting, the digital tube will
keep flashing for 5 seconds. New temperature
setting will come into effect after locking.
Temperature setting of freezing
chambers
Press temperature adjusting button of the
freezing chamber
region will make flashing indication. Then press
the button
temperature, and you will hear one beep.
Setting scope is between -16°C and -24°C.
Every time you press the button, the
temperature will change 1°C. After adjusting,
the digital tube will keep flashing for 5 seconds.
New temperature setting will come into effect
after locking.
to enter the Super
lights up, the Super cool
to enter the Super
lights up, the Super
, refrigerating
again to set
, freezing chamber
again to set the
Recommended setting: Refrigerated chamber
4°C, freezing chamber -18°C.
NOTE
The quick-freezing function is designed to
maintain the nutritional value of the food in the
freezer. It can freeze the food in the shortest time.
If a large amount of food is frozen at one time, it
is recommended that the user turn on the quick-
freezing function and put the food in. At this time,
the freezing speed of the freezer compartment is
increased, which can quickly freeze the food,
effectively lock the nutrition of the food, and
facilitate storage.
Storage upon power failure
In case of power failure, the instant working
state will be locked and maintained till re-
electrification.
Opening warning and alarm control
When the refrigerator doors get open, the
opening music will play. If the door is not
closed in two minutes, the buzzer will sound
once every second till the door is closed. Press
any button to stop the buzzer alarm.
Fault indication
The following warnings appearing on the
display indicate corresponding faults of the
refrigerator. Though the refrigerator may still
have cold storage function with the following
faults, the user shall contact a maintenance
specialist for maintenance, so as to ensure
optimized operation of the appliance.
Fault Code
E1
E2
E5
E6
E7
EN-15
Fault Description
Temperature sensor failure of
refrigerating chamber
Temperature sensor failure of
freezing chamber
Freezing defrost sensor
detection circuit error
Communication error
Ambient temperature sensor error