Measuring Blood Pressure - Sanitas sbc 55 Gebrauchsanleitung

Note: If you hold down ‚M', you can set the values
faster.
• Press ‚ ' and ‚M' simultaneously. The year starts
flashing. Set the year with ‚M' and confirm with ‚ '.
• Set the month, day, hour and minute and confirm in
each case with ‚ '.
Voice function
You can set the voice function in the switched off
state. The device offers 3 languages (English, German,
Spanish). The device is set to German on delivery. To
change the language selection, press and hold down
the ‚M' button until the desired language appears in
the display.
L1-German
L2-English
L3-Spanish
L0-Language off
The device changes the language automatically if you
keep the ‚M' button pressed. You are informed of the
language acoustically each time it changes. Release
the ‚M' button to confirm your desired language.
Volume adjustment: After selection of the language,
the bar graph of the WHO classification in the left part
of the display flashes and displays the current volume.
You can change the volume by pressing and holding
down the ‚M' button – the higher the bar rises, the lou-
der the acoustic output.
Press the ‚M' button again to confirm the selected vo-
lume and to switch off.
5. Measuring blood pressure
Positioning cuff
• Bare your left wrist, making sure that the circulation
in the arm is not restricted by any clothes etc. that
are too tight. Position the cuff on the inside of your
wrist.
• Fasten the cuff with the Velcro fastening so that the
upper edge of the monitor is positioned approx.
1 cm below the ball of your thumb.
• The cuff has to be fitted tightly around the wristbut
should not constrict it.
Important: The instrument should only be operated
with the original cuff.
1