Built-On Installation - Amica EGSP 566 100 E Bedienungsanleitung

Built-on installation

Step 1. Choose the optimal location for your dishwasher
The best location to install the dishwasher is near the water tap, the
drainage inlet and an electrical wall socket.
For details, please see the figure presenting cabinet dimensions and
dishwasher place of installation.
1. A clearance of 5 mm between the top of the dishwasher and the cab-
inet, and the door flush the cabinet.
2. When installing the dishwasher in the corner cupboard, leave room for
the door to open.
*NOTE:
Depending on the location of the wall electrical socket, you may need to
cut the opening in the cabinet rear wall.
Step 2. The cabinet door dimensions, install cabinet door (Available on
selected models)
The cabinet door should be installed in accordance with the installation
drawing.
Opening to route
electrical wiring,
water inlet and
outlet hoses.
The clearance between
the underside of the
cabinet and the floor
(For the 60 cm model)
(For the 45 cm model)
Dishwasher
Dishwasher
door
The minimum clearance
- 78 -
Cabinet