Installation; General Recommendations; Mounting On The Pipe - bürkert 8311 Bedienungsanleitung

4

INSTALLATION

For a G1/2"-version, ensure
the gasket is in place

4.1 General recommendations

Always check the chemical compatibility of the materials the con-
troller is made of with the products it may be in contact with, for
instance: alcohols, strong or concentrated acids, aldehydes, bases,
esters, aliphatics, aromatics, ketones, aromatics or halogenated
hydrocarbons, oxidizing agents and chlorinated products. For more
information, please contact your Bürkert sales office.

4.2 Mounting on the pipe

The pressure controller 8311 can be inserted in a fitting before being
mounted on any type of pipe.
During mounting, follow the instructions given with the fitting.
Do not tighten the controller
using the housing;
use an appropriate tool.
Pressure controller 8311
Do not unscrew
the metallic part
from the pipe when
readjusting the
housing.
Always replace the cover
in its initial position.
ENTER
O
U 0....9
T