Rollei Fly 60 Anleitung Seite 74

Using the Quadrocopter
74
3. After flying, switch off the remote control [2] by pressing and holding
the on / off button [21] of the remote control [2] until the on / off
button LED goes out and an acoustic signal sounds. Then press the On
/ Off switch [32] on the back of the battery [7] of the quadrocopter [1] to
switch it off, all LED lights go out.
Using two Fly 60 quadrocopters simultaneously
Follow the sequence below exactly to control two Fly 60 quadrocopters at
the same time.
1. Switch on Quadrocopter 1 and then switch on Remote Control 1. Wait
for Quadrocopter 1 and Remote Control 1 to connect. Switch off Qua-
drocopter 1 and Remote Control 1.
2. Switch on quadrocopter 2, then switch on remote control 2. Wait for
quadrocopter 2 and remote control 2 to connect.
3. Switch on remote control 1 and then switch on quadrocopter 1.
Now you can use both quadrocopters at the same time. When flying,
be sure to keep enough distance between both quadrocopters to avoid
collisions.
Note:
– If you do not intend to use the remote control for a long time after
switching off, remove the batteries to avoid leakage.
ENGLISH