Bialetti SLW06 Gebrauchsanleitung Seite 34

EN
POSITIONING AND STARTING
Even when not in use, disconnect the plug (15) from the socket be-
fore mounting or removing the single parts or before cleaning.
Follow the following precautions when positioning the appliance:
• Put the appliance on a horizontal, dry surface.
• Put the appliance so that it is protected against overheating.
WARNING
Electric shock hazard in case of use of the
appliance with damaged power cord. Nev-
er start the appliance with damaged power
cord.
SLOW JUICER ASSEMBLY
Make sure the rubber tab Fig. G underneath the bowl (2) is properly
inserted. The rubber tab properly inserted prevents the juice from
coming out into the motor.
• Clean the various parts before assembly.
• Place the bowl (2) on the motor unit (5), by aligning the three notches
on the motor unit with the slots on the bowl, Fig. B.
• Insert the container (14) into the bowl (2), by aligning the two red ref-
erence marks on the container and on the bowl (right side of the switch
(10), Fig. C. Make sure the container is totally pushed downwards.
• Position the squeezing screw (6) in the middle of the bowl (2) and press
Fig. D.
• Assemble the hopper (7) on the bowl (2), making sure the two red refer-
ence marks on both elements, switch side, are aligned (10) Fig. E.
• Rotate the hopper (7) clockwise to lock it Fig. E. The motor will not be
powered if the hopper is not completely in "locked" position.
• Position the container for liquids (13) underneath the nozzle for liquids
(3) and the container for residues (12) underneath the nozzle for resi-
dues (1) Fig. F.
• Make sure the non-drip cap (4) is closed Fig. F.
• Make sure the switch (10) is in on "OFF" position.
4. Use
34