Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - LUCTRA TABLE PRO 2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für TABLE PRO 2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Note:
The boost function is terminated automatically after 30 minutes.
• The boost touch button symbol lights up when the function is activated.
– Terminate the boost function prematurely by tapping any touch button.
• If the boost function has terminated or the 30 minutes have expired, the VITACORE
trol uses the pre-set values.
Automatic deactivation function
The lamp is turned off automatically after 4 hours in order to save electricity. It can then be
turned on again, in which case it will light up anew for a maximum of 4 hours.
You can activate or deactivate this function:
– Hold down both the boost touch button
• The lamp flashes briefly 3 times to confirm that the automatic deactivation function has
been turned off.
• The lamp flashes 3 times in a prolonged manner to confirm that the automatic deactivation
function has been turned on.
Automatic activation function for connection to the power grid
The lamp can automatically activate itself when it has been connected to the power grid.
You can activate or deactivate this function:
– Hold down both the boost touch button
• The lamp flashes briefly 3 times to confirm that the automatic activation function has been
turned off.
• The lamp flashes 3 times in a prolonged manner to confirm that the automatic activation
function has been turned on.
USB charging ports
Smartphones and tablet PCs can be charged via two built-in USB charging ports (25).
WARNING!
Risk of property damage!
Use only undamaged USB cables. This prevents damage to your devices and the
lamp.
Note:
The ports are only used to charge the connected devices. No data is transmitted.
– Connect the devices to be charged to the charging ports (25) using an appropriate USB
cable.

Cleaning and maintenance

DANGER!
Risk of fatal injury from electric shock!
Never immerse the lamp in water when cleaning it.
WARNING!
Risk of product damage!
Do not use any abrasive or sharp objects or aggressive cleaning agents.
Do not use any solvents.
– Wipe the lamp dry with a soft damp cloth or with the enclosed microfibre cloth.
and the touch button
and the touch button
EN
English
con-
®
for 5 seconds.
for 5 seconds.
LUCTRA | 17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis