Basic Operation - Sharp AY-X08BE Bedienungsanleitung

BASIC OPERATION

AM
FULL
DISPLAY
POWER
MODE FAN
1h
SWING
SET/C
+ -
| {
{ |
(The heat mode symbol
provided only on models AY-
X08BE/AY-X10BE/AY-X13BE)
Press the MODE button to select the op-
1
eration mode.
HEAT
(
Press the ON/OFF button to start opera-
2
tion.
3
• The red OPERATION lamp (
2
Press the THERMO. button to set the de-
3
5
sired temperature.
• In the AUTO and DRY
4
1
• In the COOL (and HEAT for AY-X08BE/AY-
• In the FAN ONLY mode, the temperature
Press the FAN button to set the desired fan
4
speed.
is
• In the DRY mode, the fan speed is preset to
• In the FAN ONLY mode, the fan speed can-
To turn off the unit, press the ON/OFF but-
5
ton again.
• The red OPERATION lamp (
E-8
AUTO HEAT COOL
is only for AY-X08BE/AY-X10BE/AY-X13BE)
will light.
mode, the indicator
bars represent
changes in tempera-
ture.
X10BE/AY-X13BE) mode, the temperature
can be set within the range of 18 to 32 °C
setting cannot be made.
AUTO HIGH
AUTO and cannot be changed.
not be set to AUTO.
will turn off.
DRY FAN ONLY
) on the unit
2°C higher
1°C higher
1°C lower
2°C lower
LOW SOFT
) on the unit