7.1.2
B-292LD1/B-292LD1.50/B-293LD1/B-2932LD1.50
1. Insert the fluorescence attachment above the frame and
tighten the locking screw. (Fig. 5)
2. Insert the cable in the socket placed at the rear side of the
microscope. (Fig. 6)
3. Insert the optical head above the stand and tighten the screw.
(Fig. 7)
•
Hold the head with one hand during the locking in order
to avoid that the head falls.
4. Insert both eyepieces into the tubes of the optical head. (Fig.
8)
Page 11
F ig. 5
F
ig. 5
F ig. 6
F
ig. 6
F ig. 7
F
ig. 7
F ig. 8
F
ig. 8