Assembling - Optika Italy SZR-Serie Bedienungsanleitung

8.

Assembling

1. Put the microscope base ① flat on the workbench. (Fig. 1)
2. Align the holes of the connecting plate ② of the stand column
with the holes of the microscope base.
3. Use the provided fixing screws to connect the base and the
column firmly.
4. Insert the zoom body dovetail ③ into the ovetail of the focus
system ④. (Fig. 2).
5. Lock the fixing screws ⑤.
6. Install the head by aligning the round dovetail of the head
with the hole of the microscope body. (Fig. 2)
7. Lock the fixing screw ⑥.
8. Insert eyepieces into empty eyepieces sleeves. (Fig. 4)
①
④
⑥
Page 8
②
F ig. 1 F ig. 1
③
⑤
F ig. 2 F ig. 2
F ig. 3 F ig. 3
F ig. 4 F ig. 4