Advanced Settings - Abus IPCA54581 Bedienungsanleitung

Restart the filter:
Forklift filter:
Restart the filter:

8.9.2 Advanced settings

Configuration:You
Unit temperature:
Normal mode:
In normal mode, temperatures are measured and evaluated in the entire scene. It is not possible to mark
reports.
The operation of the monitoring is exclusively the monitoring of the rising temperature, with 2 alarm thresholds
(pre-alarm and alarm threshold).
Emissivity:
Distance:
Pre-alarm threshold:
Filter time:
Alarm threshold:
Filter time:
Pre-alarm output:
Alarm output:
Restart of the filter algorithm
This is a filter to detect the shape of forklifts and ignore heat radiated from them
(e.g. in cold storage).
Restart of the filter algorithm
can choose between normal and expert mode. The differences are explained in the
following section.
The emissivity depends on the material and indicates how well a body can emit
thermal radiation.
The practical value of 0.96 is preset.
Options: Custom, or by surface roughness (Rough ~ Smooth) Rougher, Rough,
Smooth, Smoother (see section 8.9.5 for examples).
Distance between thermal imaging camera and measuring object
Temperature value above which a pre-alarm is to be triggered.
The pre-alarm information can be displayed by the ABUS CMS software or ABUS
Link Station as a push function.
For cameras with 2 relay outputs (e.g. IPCA64581D), a distinction can also be
made between pre-alarm and full alarm via different relay outputs.
Time period for which a temperature threshold must be maintained or exceeded
before a pre-alarm is triggered.
Temperature value above which a (full) alarm is to be triggered.
Time period for which a temperature threshold must be maintained or exceeded
before a (full) alarm is triggered.
A1 (or A2, if present)
A1 (or A2, if present)
137