HOMCOM 440-026 Montage-Und Sicherheitshinweise Seite 16

ATTACHING THE REFLECTORS
Screw the reflectors on the top cover of trailer and the spoke
reflectors on both sides of wheels. Make certain to tighten
these screws securely.
CAUTION!
The reflectors that comply with the BS regulations shall be
.
visible on the rear of the trailer
WARNINGS!
Never use the vehicle at night without adequate lighting and
reflectors, obey all local laws for lighting and reflectors in
accordance with BS requirements. In order to meet BS Safety
Standards, a reflector must be in place on the tear of the trailer.
INSERTING AND REMOVING THE FLAG
Assemble the two sections of the flag pole together. Insert the
flagpole into the sewn sleeve on the left rear corner of the
trailer.
15