Model Code - HYDAC ELECTRONIC ETS 4100 Bedienungsanleitung

16
IO-Link specific data:
Features
Block Parameter
Data Storage
Profile Characteristic
Supported Access Locks
Communication
E
IO-Link Revision
Port Class
Transmission rate, Baud rate
Minimum Cycle Time
Process data width
SIO Mode Supported
M-sequence capability
4) Connection with unscreened standard sensor line possible up to a max. line length of 20 m.
IO Device Description (IODD) download at: https://ioddfinder.io-link.com
Note: Reverse polarity protection of the supply voltage, overvoltage, override and and short circuit
protection are provided.
FS (Full Scale) = relative to the full measuring range
1)
Further sealing materials on request
2)
Standard version up to - 25 °C with FKM seal, - 40 °C on request
3) With mounted connector socket of the corresponding protection type, do not exceed the
tightening torque
15

Model Code

Mechanical Connection
4 = G 1/4 A ISO 1179-2, external thread
Electrical connection
6 = M12x1, 4 pole (mating connector not included)
Output
F31 = IO-Link Interface
Probe length in mm
006; 050; 100; 250; 350
Modification number
000 = Standard
Note:
On instruments with a different modification number, please read the label or the
technical amendment details supplied with the instrument.
Status: 2022-07-14
Yes
Yes (Data Storage Class 1)
0x0001 (Device Profile: Generic Profiled Sensor),
0x4000 (Common Application Profile: Identification &
Diagnosis),
0x8001 (Function Class: Switching Signal Channel)
Parameter (write)
Data Storage
V1.1
A and B
4)
38.4 kBaud (COM2)
2.5 ms
16 Bit (14 measured value- + 2 switching bits)
yes
PREOPERATE = TYPE_1_V (8 OD-Bytes)
OPERATE = TYPE_2_2 (1 OD-Byte)
HYDAC ELECTRONIC GMBH
– F31 –
ETS 4 1 4 6
ETS 4100 IO-Link
XXX – 000
Part no.: 670031