Rollei Fly 100pro Anleitung Seite 76

First Steps
76
Inserting the memory card
Photos and videos can only be taken with the memory card* inserted.
Therefore, before switching on the quadrocopter [1], insert a micro SD /
SDHC memory card* into the memory card compartment [34] of the
quadrocopter [1].
– Insert the memory card* according to the illustration below. The inscrip-
tion on the memory card* points to the underside of the quadrocopter
[1]. Press the memory card* deep into the memory card compartment
[34] until it audibly clicks into place.
– To remove the memory card*, press it again briefly; the memory card*
will then be ejected a little.
– To avoid damaging the memory card*, switch off the quadrocopter [1]
before inserting or removing the memory card*.
– MicroSD/SDHC memory cards up to 32GB capacity are supported.
ENGLISH
*not included