Prepare The Quadrocopter - Rollei Fly 80 Anleitung

Prepare the Quadrocopter

Insert the batteries into the remote control
To insert the batteries [3] into the remote control [2], first open the remote
control [2]. On the back of the remote control is the battery compartment
[26]. Now open the protective cover of the battery compartment by first
unscrewing the screw with the screwdriver [8] and then pulling the clamp
fastener on the top slightly inwards and then lifting off the cover.
– First remove any batteries from the battery compartment [26].
– Insert 3 fully charged batteries [3]. When inserting, pay attention to
the correct polarity of the batteries [3], which is marked in the battery
compartment [26] for each battery.
– Close the battery compartment [26] again with the protective cover and
screw it back on tightly.
65