Manual Control - Klarstein WONDERWALL SANTORINI SMART Bedienungsanleitung

EN

Manual control

To enter manual mode, activate the power switch and press the power button to
switch on the heater. The symbol "M" is displayed on the screen. Set the desired
temperature by pressing the - or + button. 2 seconds later, the screen will show
the current room temperature again. If you want to set the timer, press the Timer
button. The screen displays "00H" and you can set the timer by pressing the - and
+ buttons to start the countdown.
Child safety lock
Press and hold the power button for 5 seconds. "CL" is displayed on the screen to
enter the child lock mode. Press and hold the power button for 5 seconds to exit
the child lock mode.
28