Silvercrest SBBK 700 A1 Kurzanleitung Seite 15

Assembly
Inserting/removing the hose
• Insert the hose 1 into the connection
opening 8 on the top of the device. The
hose must audibly click into place.
• To remove the hose 1 press the two re-
lease buttons 6 and pull out.
Attaching the telescopic tube
• Insert the hose 1 with the handle 16
into the upper end of the telescopic
tube 14. For a better grip, turn the han-
dle slightly back and forth.
Attaching/removing the nozzle
• All nozzles can be attached directly to
the handle 16 of the hose 1 as well as
to the lower end of the telescopic
tube 14.
• Plug in the desired nozzle. Turn the noz-
zle slightly back and forth for a better
grip.
• To remove, gently turn the nozzle back
and forth and pull it.
Adjusting the length of the tele-
scopic tube
1. Push down the slider 13 on the tele-
scopic tube 14 and set the desired
length.
2. Release the slider 13 and continue to
move the telescopic tube 14 until it
clicks into place.
Using the nozzle
Floorhead
12
Suitable for carpets and smooth floors.
Switch between the two functions using the
foot button 11.
- For smooth floors such as
tiles, tilt the foot button 11
to the „brush extended"
symbol. The brush on the
underside is extended.
- For carpets, tilt the foot but-
ton 11 to the „brush retract-
ed" symbol. The brush is re-
tracted.
Upholstery nozzle
The upholstery nozzle 3 is
suitable for upholstered fur-
niture, mattresses and car
seats, etc.
Crevice/brush nozzle
The crevice nozzle 2 is suit-
able for skirting boards,
corners, columns and uphol-
stery etc.
• Fold the brush out in the direction of the
arrow to turn the crevice nozzle 2 into a
brush nozzle.
This is suitable e.g. for uneven objects,
lamps, profile strips.
3
2
13
GB