Working With The Tripod; Cleaning; Storage - Parkside PKLL 7 E4 Originalbetriebsanleitung

5. Align the device. To do
so, release the retaining
screw (8) and move the
device into the desired
position.
6. Fix the position by
fastening the retaining
screw (8).
Working with the
tripod
You can place the device in
a stable position and adjust
the height using a tripod
(not provided in scope of
delivery).
Place the device with th-
read (5) onto the tripod
screw and tighten by hand.
Do not use excessive force
as this may damage the
device.

Cleaning

Have any work on
the device that is
not described in this in-
struction guide perfor-
med by a professional.
Only use original parts.
Do not use any cleaning
agents or solvents. Che-
mical substances may attack
the plastic parts of the device.
Never clean the device under
running water.
Thoroughly clean the de-
•
vice after every use.
Clean the disc protecting
•
the laser (6) with a soft jet
of air, or soft cloth. Do not
use heavy pressure as this
may damage the surface!
Clean the surface of the
•
device with a soft brush or
cloth.

Storage

Remove the batteries from
•
the device prior to leaving
it in prolonged storage.
Store the device in a dry
•
and dustproof location and
out of reach of children.
GB IE
11