Group Operation Settings - Mitsubishi SC-SL3NA-AE Anwenderhandbuch

Group Operation Settings (Monitor Group Status)
1. Press the ALL BLOCKS button on the MAIN MENU.
2. Press the block you wish to set or monitor.
The GROUP (PANEL) screen is displayed.
The group name, status, fi lter sign, maintenance, scheduling, temperature settings and room temperature can
be observed.
Note
3
4
Note
• See Icons for the signifi cance of the icon displays.
• The running status, operating mode, temperature settings and room temperature are shown for the repre-
sentative unit. When all units are stopped, stopped status is shown.
• Groups that have the current day's schedule settings show
• being displayed means that these are lit for one or more units.
• If the GROUP LIST button is pressed, the GROUP (LIST) is displayed.
• To display the units in a group, press the UNIT LIST button.
<When running and stopping each group>
3. Press the panel of the group for which settings are to be made.
The panel frame turns blue.
4. To run units
The selected group starts running.
To stop units
The selected group stops running.
When you do not want to set, press the No button.
<When making settings and changes on each group>
3. Press the panel of the group for which settings or changes are to be made.
The panel frame turns blue.
4. Press the CHANGE button.
The screen for basic group settings is displayed. When the screen changes, no items are selected (the
temperature setting is blank). Set only the items that are to be set or changed.
[GROUP (PANEL) screen]
Press the RUN button, and press the Yes button on the confi rmation screen.
Press the STOP button, and press the Yes button on the confi rmation screen.
Page 7
Page 10
.
Page 24
– 15 –
4
Page 17