MO-EL 9815 Gebrauch Und Wartung Seite 13

REMOTE-CONTROLLED MODEL
For maximum flexibility all models are available with dimmer to ad-
just the intensity of the heater comfortably by remote control.
The length of each model increases by 15 cm, while the width and
height remain unchanged..
Insert into the remote control a 12V A23 battery (not included),
-
matching the polarities.
Connecting the machine.
-
Use the remote control as shown in figure.
-
ON Ignition device
STANDBY Shutdown device
LOW Select 1/3 of power: the blue LED lights on
Select 2/3 of power: the violet LED lights on
MED
HIGH Select max power: the red LED lights on
After each restart, the product will return to the setting selected
MOUNTING
Before being used, the heater must be fixed to the wall or to the ceiling by
Ensure that the wall where you intend to attach the device is solid and that
within it do not pass electric cables or water pipes.
1. Drill four holes in the wall as shown.(FIG.1)
2. Fix the two supports to the wall using dowels of appropriate
size. (FIG.2)
3. Insert the arch-shaped support in the special rail on the upper
side of the device (FIG.3)
4. Align the holes of the supports and join them together using the
supplied bolts, setting the desired inclination. (FIG.4)
Ensure that the heater turns her rays in the area to be heated. Firmly tighten
before it was turned off.
means of the provided supports
the screws when finished.
13