auna iTuner CD Bedienungsanleitung Seite 64

EN
64
buttons to select Prune invalid and then press the SELECT button to
confirm.
2. Press the
button to confirm, or select [NO] to cancel.
DRC (Dynamic Range Compression)
If you are listening to music with high dynamic range in a noisy
environment, you may wish to compress the audio dynamic range.
1. During DAB mode, press the MENU button and press the
buttons to select DRC and press the SELECT button to confirm.
2. Press the
SELECT button to confirm the setting.
Station Order
You may wish to arrange the station listing order.
1. During DAB mode, press the MENU button and press the
buttons to select Station Order and press the SELECT button to confirm.
2. Press the
order and press the SELECT button to confirm the setting.
DAB Display Modes
Every time you press the MENU button on the unit or INFO on the
remote control, the display will show the following display modes: DLS –
Programme Type – Ensemble/Frequency – Signal error/Strength – Bit rate/
Codec/Channels – Date
DLS (Dynamic Label Segment)
This is a scrolling message giving real-time information, e.g. song titles,
news headlines, etc.
Programme Type
This describes the "style" or "genre" of the programme that is being
broadcast.
Ensemble Name/Frequency
This display the name of the multiplex that contains the station you are
listening to and the frequency. A multiplex is a collection of radio stations
that are bundled and transmitted on one frequency. There are national and
local multiplexes. Local ones contain stations that are specific to that area.
Signal Error/ Signal Strength
The error is shown as a number. If the number is 0, it means the signal
received is error free and the signal strength is strong. If the error rate is
buttons to select [YES] and press the SELECT
buttons to select DRC high/low/off and press the
buttons to select Alphanumeric/Ensemble/Valid