Important Safety Instructions - Exo Terra PT2459 Gebrauchsanleitung

Both the daytime and nighttime temperatures can be set separately
to guarantee safe daytime-nighttime temperature fluctuations for
your reptiles. The dimming function keeps the temperature at the
desired setpoint with a much higher accuracy than conventional
thermostats and virtually eliminates temperature swings in the
terrarium. The easy-to-read blue LCD screen shows actual and set
temperature, and will automatically increase brightness of the LCD
in day mode and use dim light when in night mode. A Red LED and
a heating symbol will indicate when the heating device is switched
ON. Once the set temperature is reached, the LED will switch to
Blue and the heating symbol will no longer show. The temperature
probe with built-in light sensor switches automatically between
daytime and nighttime temperature setting, based on the light
intensity. Simply connect your Heat Mat, Heat Cable, Ceramic Heater
or Heat Bulb to the Exo Terra
the preferred daytime and nighttime temperatures and place the
heat sensor in the desired spot. The push button/dial system of the
thermostat will prevent accidental changes of the set temperature if
the device is being handled. The Thermostat comes with a 6.2 foot
/ 190cm power-cord with grounded plug & receptacle for increased
safety and to allow the use of a power outlet strip. The waterproof
remote sensor can be safely used in highly moist terrariums and
aquatic environments.
The Exo Terra Thermostat should be set according to the needs
®
of the animals. Thoroughly research the preferred optimum
temperature range (POTR) for your specific reptile, so you can create
the correct temperature gradients inside the terrarium to allow your
reptiles to thermoregulate.
4
Red LED and heating symbol will indicate when heating device
is powered.
Blue LED will indicate when set temperature has been reached.
READ INSTRUCTIONS THOROUGHLY PRIOR TO INSTALLATION
AND OPERATION.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: To guard against injury,
basic precautions should be observed
when handling the appliance, including
the following:
1. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS and all
important notices on the appliance
Day/Night Dimming Thermostat, set
®
before using. Failure to do so
may result in in personal injury or
damage to the unit.
2. DANGER – For each of the
following situations, do not attempt
repairs yourself; return the product
to an authorized service facility for
service if it is still under warranty
or discard the appliance. Do not
operate the appliance if it has a
damaged electrical cord or if it is
malfunctioning or if it is dropped or
damaged in any manner.
A. For INDOOR HOUSEHOLD USE ONLY,
NOT for commercial use.
B. Carefully examine the appliance
after installation. It should not be
plugged in if there is water on parts
not intended to be wet.
C. Do not operate any appliance if it
has a damaged cord or plug, or if it
is malfunctioning or if it is dropped
or damaged in any manner. The
power cord of this appliance is a
Z type attachment and cannot be
replaced; if the cord is damaged,
the appliance should be discarded.