Siemens SIMATIC IFP2200 MT Produktinformation Seite 10

Interfaces
"Standard" versions
① Connector for protective conductor
② X80 connector for 24 V DC power supply
③ X71 DVI-D interface
④ X70 DisplayPort interface
⑤ X60 USB Type B
Installing devices
Permitted mounting positions
The same mounting positions and ambient temperatures that are specified in the underlying operating instructions on the
electronics apply to the device.
Mounting cutout
Dimensions of the mounting cutout for installation of IFP2200 MT devices in landscape mode: 513
(width×height)
Width and height should be reversed accordingly when mounting in vertical format.
The specifications for stability of the mounting cutout and degrees of protection in the operating instructions "Industrial Flat
Panel IFP1500, IFP1900, IFP2200, IFP1900 PRO, IFP1900 ETH, IFP2200 ETH" apply.
Position of the mounting clips for IP65-complaint installation
Fasten the mounting clips (available as accessory) to the positions as illustrated.
Device
22" display
10
"Extended" versions
① Connector for protective conductor
② X80 connector for 24 V DC power supply
③ X71 DVI-D interface
④ X70 DisplayPort interface
⑤ X61/X62 USB Type A
⑥ X63 USB link interface
⑦ X60 USB Type B
Position
× 315 mm
+1 +1
SIMATIC IFP2200 MT
A5E37770549-AG, 08/2022