Assembling And Operating The Appliance - Silvercrest SFEE 800 A1 Bedienungsanleitung

Assembling and operating the appliance

■ Before using the appliance for the first time, clean all component parts
thoroughly as described in the section "Cleaning and care" .
■ Select a safe and secure positioning for the juicer . For optimal handling we
recommend that the appliance is positioned with the power cable 8 running
from the rear of the appliance to the wall socket . All operating elements can
now be directly and easily handled:
–
–
–
WARNING! RISK OF INJURY!
► Ensure that the appliance is switched off and the plug 8 removed from the
wall socket before assembling the appliance .
1) Place the juice tank 5 on the appliance base 7, so that the three catches
and the juice outlet 6 grip into in the recesses .
2) Place the filter w on the drive shaft e and press it down so that it audibly
clicks into place . Ensure that it is firmly seated before continuing with the
assembly .
3) Slide the container for fruit and vegetable pulp q from below under the
outlet (see fold-out page) .
4) Place the lid 3 onto the juice tank 5, so that the feed tube 2 is sitting
above the blades of the filter w .
5) Ensure that the lid 3 is sitting firmly in the recess on the juice tank 5 .
Lift the clamps 4 and clip them into the notches on the lid 3 .
6) Press the lower part of the clamps 4 against the appliance until they click
into place .
7) Push the foam separator z into the juice collector t and put the lid on .
Place the separate juice collector t next to the appliance so that the juice
outlet 6 protrudes into the separate juice collector t .
8) Insert the plug 8 into a mains power socket .
SFEE 800 A1
the On/Off switch 9 at the front,
the container for fruit and vegetable pulp q on the left,
the juice outlet 6 on the right .
GB │ IE │ 7 ■