About the Transmitter Unit
Use two or more Transmitter units. By preparing several cameras that with Transmitter
units flash attached, cameras can be changed in shooting while keeping the same
lighting source. (Receiver unit).
M: Wireless Flash Shooting with Manual Flash
This describes wireless (multiple shooting) using manual flash. You can shoot with a
different flash output setting for each Receiver unit (firing) group. Set all parameters on
the Transmitter unit.
Setting the flash mode to
<M>
Setting <M> Flash Mode
You can directly operate the Receiver unit to manually set the manual flash or
stroboscopic flash.
1. Setting the Receiver unit.
2. Setting flash mode to <M>
Press <MODE> button so that <M> is displayed.
•
Set the manual flash output.
•
Setting flash output.
Press Function
•
Button
1/2/3/4<M/A/B/C>.
Turn the Select Dial
to set the flash
output of the
groups. Press Set
Button to confirm.
23
Taking the picture.
Each group fires at
•
the set flash ratio.