Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
force applied externally. An internal short cir-
cuit may occur, causing the battery to burn,
smoke, explode or overheat.
Only use the battery with products from the
u
manufacturer. This is the only way in which you
can protect the battery against dangerous over-
load.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is
a risk of explosion and short-circuiting.
Hold the power tool firmly with both hands
u
and make sure you have a stable footing. The
power tool can be more securely guided with
both hands.
Product Description and
Specifications
English
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or ser-
ious injury.
Please observe the illustrations at the beginning
of this operating manual.
Intended use
English
The power tool is intended for planing wood-
based materials such as beams and boards while
resting firmly on the workpiece. It is also suitable
for chamfering edges and for rebating.
Product features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Knob for setting the cutting depth
(2) Button for maximising the cutting depth
(max. 2 mm)
(3) Lock-off button for on/off switch
(4) On/off switch
(5) Rechargeable battery
(6) Battery release button (2x)
(7) Drawer for spare blades
(8) Side cutter block guard
(9) Planer base plate
(10) Battery charge indicator
(11) Screw for belt cover
(12) Belt cover
(13) Chip ejector (can be inserted on the right-
hand or left-hand side)
1 609 92A 72E • 2.12.21
a)
a)
(14) Adjustable planer base plate
(15) V-groove
(16) Handle (insulated gripping surface)
(17) HM/TC planer blade
(18) Hex key
(19) Blade head
(20) Clamping element for planer blade
(21) Fastening screw for planer blade (2x)
(22) Extraction hose (Ø 35 mm)
(23) Chip/dust bag
a)
(24) Dust extraction adapter
(25) Locking mechanism
a)
a) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.
Technical data
English
Planer
Article number
Rated voltage
A)
No-load speed
Cutting depth
– Optimum
– Maximum
Rebate depth
Max. planing width
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
ature during operation
C)
and during storage
Recommended re-
chargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery BBP
12V 3.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
In unfavourable conditions, it is possible that the power tool
may switch itself off due to electrostatic discharge. After
switching the power tool back on again, it will work as inten-
ded.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-14.
Typically, the A-weighted sound pressure level of
the power tool is 79 dB(A). Uncertainty K = 3 dB.
a)
a)
BACP BL 12V
418 993
V
12
-1
min
14,500
mm
0–1.0
mm
1.0–2.0
mm
0–17
mm
56
kg
1.7–1.9
°C
0 to +35
°C
–20 to +50
BBP 12V x.xAh
BBCF 12V
English
English | 15
Werbung
Inhaltsverzeichnis
