GB
• Remote control is only used in normal mode
• [ ] key, turn the heater on or off
• [
] key, toggle the heating level, same as
the [M] key.
• [
] key, smart saving energy mode. In this
mode, the appliance measures and records ambi-
ent temperature. It will stop working when the
ambient temperature drops by 5 °C within 10 min-
utes.
• [ ] key, turn it on or off regularly, and set the
length of time, the same as the [
• [
] and [
] key, adjust the setting temper-
ature, increase or decrease by 1 °C per press.
Open window detection
Control panel:
– Press [M] button 3 seconds, the [ ] light will be
on. The appliance is working as a smart saving
energy mode. In this mode, the appliance meas-
ures and records ambient temperature. It will stop
working, when the ambient temperature drops by
5 °C within 10 minutes. Press [M] button 3 sec-
onds again, the [ ] light will be off, window open
function is turned off.
Fault/malfunction
Device does not heat.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
28
Remote control:
Cleaning
– Switch off the device and let it cool off completely.
– Pull out the plug.
– Wipe the device with a slightly damp cloth.
] key.
Faults and remedial measures
When something isn't working...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
Is the device switched off?
Is the temperature regulator set too
low?
No mains voltage?
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
Technical data
Item number
Nominal voltage
Nominal output
Switching levels
Protection class
Dimensions
Weight
Battery for remote control
• [
] Key, open window function key
DANGER! Risk of injury! Before all work
on the device, always disconnect the mains
plug.
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Remedial measure
Switch on the device.
Set the temperature regulator high-
er.
Check cables, plugs, outlets and
fuse.
cling.
Note: The product is intended for use only
in properties having a mains current carry-
ing capacity of ≥100 A per phase and being
supplied by a distribution network with a
mains voltage of 230 V. If required, contact
the electricity company to ensure that the
mains current carrying capacity at the con-
nection point to the public power grid is ade-
quate for connecting the product.
482030, 482051
230 V~, 50 Hz
2000 W
1000 W
2000 W
I
83 × 26 × 52 cm
8 kg
2× LR03, AAA, 1,5 V