Technical Data; Noise/Vibration Information; Product Features - Bosch GBH 3-28 E PROFESSIONAL Bedienungsanleitung

Technical Data

Rotary Hammer
Article number
Rated power input
Rated speed
Impact rate
Impact energy per stroke
Tool holder
Max. drilling dia.
– Concrete (with twist drill)
– Brickwork (with core bit)
– Steel
– Wood
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

Noise/Vibration Information

Measured values
EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Hammer drilling in concrete: Vibrational emission
2
value a =16 m/s , uncertainty K=2 m/s
h
The vibration emission level given in
WARNING
this information sheet has been
measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information
sheet. This could lead to a significant underestimate
of exposure when the tool is used regularly in such a
way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given
period of work should also take into account the times
when the tool is switched off and when it is running
but not actually doing the job. This may significantly
reduce the exposure level over the total working
period.
16 | English
determined according
2
.
GBH 3-28 E
PROFESSIONAL
0 611 239 7..
W
rpm
bpm
J
mm
mm
mm
mm
kg

Product Features

to The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Lock ring of the tool holder (GBH 3-28 FE)
5 Button for depth stop adjustment
6 Selector switch for drilling/hammer drilling
7 On/Off switch
8 Auxiliary handle
9 Depth stop
10 Securing screw for key type drill chuck*
11 Key type drill chuck*
12 SDS-plus adapter shank for drill chuck*
13 Keyless replacement chuck (GBH 3-28 FE)
14 Front sleeve of the keyless replacement chuck
(GBH 3-28 FE)
15 Retaining ring of the keyless replacement chuck
(GBH 3-28 FE)
16 Extraction sleeve of the dust extraction attach-
ment*
17 Clamping screw for the dust extraction attach-
ment*
18 Depth stop of the dust extraction attachment*
19 Telescopic pipe of the dust extraction
attachment*
20 Wing bolt of the dust extraction attachment*
21 Guide pipe of the dust extraction attachment*
*The accessories illustrated or described are not
included as standard delivery.
GBH 3-28 FE
PROFESSIONAL
0 611 249 7..
720
0–800
0–4000
3.3
SDS-plus
28
80
13
30
3.3
/II
1 619 929 719 • 13.9.06
720
0–800
0–4000
3.3
SDS-plus
28
80
13
30
3.4
/II