Setting Up The Appliance; Aligning The Appliance; Attaching The Door Handle - hanseatic HGS18560DEI Gebrauchsanleitung

Setting up the appliance

1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.

Aligning the appliance

1. Close the appliance door.
2. Tilt the appliance slightly back and screw
in/unscrew the screw feet (7).
3. Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the ap-
pliance door.

Attaching the door handle

If you wish, you can now attach the door han-
dle (9).
(7)
1. Use a knife or a flat-tip screwdriver to re-
move the blind plugs (12) from the side of
the appliance door.
(9)
2. Secure the door handle (9) with the
screws provided (13).
Start-up Page EN-27
(12)
(13)