Alarm State - Abus COWM300 Bedienungsanleitung

Alarm state

If a critical amount of CO is detected in the
room, the measured CO concentration is
shown in the display and the alarm outputs
the following signals:
4 short beeps
|| 5 s pause ||
4 short beeps
After 4 minutes, the alarm signal changes
as follows:
4 short beeps
|| 60 s pause ||
4 short beeps
Every beep is accompanied by blinking of
the red ALARM LED. The alarm beeps as
long as there is CO in the air. If the
concentration falls below the critical
threshold, the alarm goes silent and the
device returns to the Normal state.
Displays and functions
1 x = 1 x
[5s]
[60s]
ALARM
35