Installation - Klarstein VALDOSTA 6.1 Bedienungsanleitung

EN
52

INSTALLATION

Preparation
• To operate this gas grill you need a gas bottle (liquid gas) and a suitable gas
pressure regulator. The controllers should comply with the EN 12864 standard
(as amended) and national regulations.
• Connect the hose and regulator to the gas container on the left-hand side of
the gas grill, taking care to keep the gas container away from heat and in a
safe position.
The hose should have a diameter of 8-10 mm. The recommended length of the
hose must not exceed 1.5 m. The flexible hose should comply with the relevant
standard and local regulations.
Installation
After purchasing a suitable gas bottle, you can set it up with your gas grill.
• Change the gas cylinder away from any source of ignition.
• Position the gas bottle on the left side of your gas grill or place it in the gas
bottle compartment inside the barbecue. Make sure that the gas bottle is
protected from heat and stored in a safe position.