Using Programs - Silvercrest SHF 1400 A1 Kurzanleitung

Using Programs

NOTES:
• Make sure that the food will not touch
the hot heating element 2 at the top of
the interior and become stuck there.
• QUICK START FUNCTION
Switch the device on from standby mode
with the Start/Stop button
the Start/Stop button
cooking at the preset temperature
180 °C for the preset cooking time
15 min.
1. Prepare the foods and place them in the
frying basket 5.
2. Place the frying basket 5 in the pan 10.
3. Slide the pan 10 into the housing 1.
4. Switch on the device with the Start/Stop
button 20.
5. Press the Menu button
ly to select the desired program. The
corresponding symbol flashes.
6. Start the cooking process with the Start/
Stop button 20.
Interrupting the cooking process
You can interrupt the cooking process at any
time, e.g. to check the degree of browning.
1. Take the pan 10 by the handle 9 and
remove it from the housing 1. When the
pan is taken out, the device automatical-
ly switches itself off.
2. Reinsert the pan 10 into the device. The
device switches on again automatically
until the cooking time has expired.
18 GB
End of the cooking process
• An audio signal sounds when the pro-
• You need a heat-resistant surface for the
• To disconnect the device from the mains
20. Press
again to start
1. Use the handle 9 to pull the pan 10 out
2. Figure A: slide the safety catch 7 in
3. Press the button for unlocking the frying
4. Place the frying basket 5 on the heat-re-
23 repeated-
5. Allow the device and accessories to
gram has finished. The fan continues to
run for approx. 1 minute.
pan 10 and the frying basket 5 and a
plate or bowl (pre-heated if necessary).
pull the mains plug 11 after use.
of the housing 1. Place the pan 10 on
the heat-resistant surface.
the direction of the arrow.
basket 8 and lift the frying basket 5 up-
wards out of the pan 10.
sistant surface. Place the food on the
prepared plate / in the prepared bowl.
cool down before cleaning them.