Adjusting The Water Temperature; Setting User Profiles; Adjusting The Night Light - Duravit SENSOWASH Bedienungsanleitung

Adjusting the water temperature

> Press the "Temperature" button
is at "Water temperature".
> Press the "+" or "-" button
You can now use the "+" or "-" buttons
The water temperature can be individually adjusted in 4 levels.
Off > Low > Medium > High
Setting user profiles
> Adjust all of the functions based on your personal preferences (e.g the position of
the spray wand, temperatures, water spray intensity, etc.).
> Press the "User" button
The indicator lights of the remote control flash briefly.
Your settings have been saved.
You can use all of your preset functions by pressing the "User" button
the next use.
All settings made can be changed at any time.

Adjusting the night light

> Press the "Stop" button
button 6 on the remote control.
You can now set the mode of the night light.
The night light can be set individually to 3 different modes.
44
10 on the remote control until the indicator light
9 on the remote control.
9 to set the suitable water temperature.
7 or 8 for 3 seconds.
5 and keep this pressed. Now press the "Warm air dryer"
7 or 8 on