Parts Description; Functional Description; Charging The Battery - Makita BL1055B Betriebsanleitung

PARTS DESCRIPTION

This battery can be used for following Makita fan jacket/
vest and heated jacket /vest/blanket.
► Fig.1
Group
A Fan jacket /vest:
DFV210, DFJ206, DFJ207, DFJ210, DFJ211,
DFJ212, DFJ213, DFJ214, DFJ216, DFJ304,
DFJ305, DFJ310, DFJ311, DFJ405, DFJ407,
DFJ410, DFJ411, DFJ416
Heated jacket /vest/blanket:
CV102D, DCV202, CJ105D, CJ106D, DCJ205,
DCJ206, CB100D, DCB200
B Fan jacket /vest:
DFJ212A, DFJ213A, DFJ214A, DFJ216A,
DFJ312A, DFJ416A, DFV210A, DFV214A,
DFV215A
1. Power level indicator
When using a fan jacket/vest, the power level is
displayed.
NOTE: If you use the fan jackets/vests in group A
listed above, the power level indicator 4 will not lights
up because their fan units employ 3-step control.
NOTE: If you use the heated jacket/vest/blanket, only
the power level indicator 4 will lights up.
2. Battery capacity indicator
The level of remaining battery capacity is displayed.
3. Power button
To turn on, press and hold the power button until the
power level indicator lights up.
To change the power level of the fan jacket/vest, press
the power button briefly when the power is turned on.
To turn off, press and hold the power button until the
power level indicator turns off.
NOTE: To change the warmth of the heated jacket/
vest/blanket, press the button on the heated jacket/
vest/blanket when it is powered.
4. USB port (with cover)
The USB port is used for charging the battery and also
used as a power supply output for your USB device.
5. Power socket
Connect the cable from the jacket/vest/blanket or the
adapter cable to supply power.
6. Adapter cable for fan jacket/vest (optional
accessory)
Use adapter cable when using the fan jacket/vest in
group A listed above.
7. Adapter cable for heated jacket/vest/blanket
(optional accessory)
Use adapter cable when using the heated jacket/vest/
blanket in group A listed above.
8. Socket of the jacket/vest/blanket
Connect the suitable adapter cable for the fan jacket/
vest or heated jacket/vest/blanket. The shape and
location of the socket vary depending on your jacket/
vest/blanket.
Model
9. USB cable
Use the USB cable for charging the battery.
FUNCTIONAL
DESCRIPTION

Charging the battery

CAUTION:
When charging, plug the USB con-
nector securely to the battery. Loose connection
may cause risk of smoke, fire and personal injury.
CAUTION:
During charging, do not connect
any appliances to the power socket of the battery.
CAUTION:
Always disconnect the USB cable
from the battery after charging.
NOTICE:
Be sure to charge the battery before
using it for the first time. Factory shipped battery is
not charged sufficiently and battery protection system
may work if used without charging.
NOTICE:
When the AC power adapter is con-
nected to the battery, the tool or machine does
not start. In this case, remove the AC power
adapter from the battery.
Open the cover on the USB port. Connect the battery
and AC Power Adapter ADP07 (not included) or other
general USB charger using the USB cable supplied with
the battery. The recommended output spec for general
USB charger is 5 V / 2.4 A or lower. After that, plug
the AC Power Adapter ADP07 to the mains. When the
charging is finished, all battery capacity indicator will
light up and then turns off after a certain period. Unplug
the AC Power Adapter and disconnect the USB cable,
and then close the cover.
► Fig.2: 1. AC Power Adapter ADP07 2. Battery
BL1055B 3. Cover 4. USB cable
Meaning of the indicator lamp
Indicator lamps
Lighted
(The lamps go off after a certain period.)
5 ENGLISH
Off Blinking
(The charging
Remaining
capacity
100%
is finished)
50% to 100%
25% to 50%
0% to 25%