1
Top cover
2
Aluminium filter
3
Induction cooker
4
Plastic tube support plate
5
Plastic tube
Installation
1. Make sure that all items included in the scope of delivery are complete.
2.
Cut a hole of size (W x H) 875*501 mm.
3.
Follow the instructions below.
Precautions
• The device must be installed by qualified personnel. Do not attempt to install the
device yourself under any circumstances.
• The device must not be installed directly above a dishwasher, refrigerator, freezer,
washing machine or tumble dryer, as the moisture could damage the electronics of
the device.
• Install the induction cooker so that heat radiation can be guaranteed.
• The surface surrounding the appliance and the adjacent wall should be heat
resistant.
• To avoid damage, the interlayer and the adhesive must be heat resistant.
Establishing the power connection
Note: This appliance must only be connected to the mains socket by a qualified
person.
• Before connecting to the mains, make sure that:
• the wiring in your home is suitable for the requirements of the unit,
• the voltage of the socket corresponds to the voltage stated on the type plate of
the device,
• the power cord meets the requirements specified on the type plate of the
device.
6
Air outlet
7
Activated carbon filter
8
Activated carbon filter cover
EN
57