Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing and connecting the antenna
Requirements for
antenna installa-
tion
Schematic dia-
gram of antenna
screw joint instal-
lation
Installing and
1
1
connecting an-
tennas
42
NOTE!
-
The antenna can be installed horizontally on the inverter housing sides or
vertically on the bottom of the inverter.
If several inverters are arranged next to each other with horizontally-mounted
antennas, proper spacing between the inverters should be maintained.
-
You should only use the 3/4 in. knockouts provided on the inverter for anten-
na installation.
In addition, you should only use the antenna screw joint provided in the Fro-
nius SolarCity card scope of supply to ensure leak-tightness.
-
If plastic dividers are used in the inverter to separate AC/DC cables and data
communication wires, the data communication wire and the antenna cable
must be laid over the plastic dividers.
-
Follow all information in the operating instructions, safety rules and safety in-
structions for the respective inverter.
B
2
1
Legend:
(1)
(2)
(1)
Hex nut
(3)
size 1.3 in. / 33 mm
(2)
Inverter housing
(4)
(5)
(3)
Sealing ring
(6)
(4)
Antenna screw joint
(5)
Locking ring
A
(6)
Hex nut
size 5/16 in. / 8 mm
(7)
(7)
Hex nut on antenna cable
size 5/16 in. / 8 mm
A
Antenna
B
To Fronius SolarCity card
2
2
1
Werbung
Inhaltsverzeichnis
