Hama WFC840 Bedienungsanleitung Seite 18

In the event the Meteotime icon change to , that means there are potential sources of interference on the unit. The
sources of interference may come from the electronics equipment such as TV-set, computers, household machines etc. It
may also be due to lots of concrete, metal parts and electrical equipment in the building. It may also be due to your living
area if it is very far away from the Radio-controlled clock tower.
You are able to use the TEST function to look for a better location.
• Press TEST button, SCAN is shown in the Information Window.
• Pick the unit to find a good location.
• flashing : The test is running and the Meteotime signal reception is good. You are able to leave the device in this
position.
• flashing: The test is running and the Meteotime signal reception is poor. You need to keep on looking for a
better location.
• The test lasted for around 1 minute. You can restart the test with the [TEST] key at any time, and also discontinue
the test by press the TEST key.
SWITCH CITY  SUNRISE & SUNSET TIME 
• After inserting the batteries, the weather station searches for the Radio controlled Time signal as well as the
MeteoTime signal. After it has successfully received the MeteoTime signal, the display shows in the information
window "Select Country". • After a few more minutes, the information windows the default city "
• You are able to press [ SET ] to switch from the display of the City to Sunrise & Sunset time OR Time & Date for
Frankfurt am Main.
 [SET] 
 [SET] 
SELECT THE COUNTRY AND CITY / CITIES
• Press and Hold [ SET ] for 3 second, in the information window,
to select the country. For example, you have selected the country name such as
shown in the information window.
34
means it successfully receives today's weather
information. Otherwise, it will be
means it is able to receive the
Meteotime weather signal. Otherwise, it will be
means it successfully receives
tomorrow weather information.
Otherwise, it will be
means it successfully receives
weather information of one-day-after.
means it successfully receives
weather information of two-day-after.
TIME & DATE
is shown, and then press [
means Germany will be
• Press [ SET ] key to confirm the Country (let's said we
select Germany right now), and then the information
window will show
• Then, press [ ] or [ ] key to select the city, and the
city name will be shown in the information window such
as
Main'.
• If the city 'Frankfurt am Main' is your selection, then
press [ TEST √ ] key to confirm. A √ will be shown on top
of your selected city, and it will be
and 'Frankfurt am Main' will store into your personal
memory list.
• Then, you are able to press [
more cities, and then press [ TEST √ ] key to confirm.
You are able to select maximum FIVE cities to display. If
you want to add more cities, then
show in the Information Window.
OR
press [ SET ] KEY to quit, and
information window.
REMARK: If you have skip the city selection in the first
time you power up the unit, the product will default select
Frankfurt am Main as your selected city.
DISPLAY MORE CITIES INFORMATION
• If you have selected more than one city, let said you
have select Frankfurt am Main, Köln and Münster in
your desired city list, then you are able to press [
[ ] key when the Information Window shows the CITY
NAME (Press SET until it displays the City Name).
[ / ] 
When you selected the other city, the sunrise and sunset
time, and weather information will be of this selected city.
REMOVE YOUR SELECTED THE CITY / CITIES OUT OF
MEMORY LIST
• Press and Hold [ SET ] for 3 seconds,
".
shown in the Information Window, then press [
[ ] key to select the country. For example, you have
selected the country name such as
Germany.
• Press [ SET ] key to confirm the Country (let's said we
select Germany right now), and then the information
window will show
] or [ ] key
• Then, press [ ] or [ ] key to go to your selected city,
lets said 'Frankfurt am Main', and the
will show in the information window.
• Press [ TEST √ ] key to remove the √ , and this city is
successful to remove out of your list of preference cities
you have selected.
.
• Then, you are able to press [
more cities, and then press [ TEST √ ] key to remove
your selected cities. OR
means the city 'Frankfurt am
Press [ SET ] KEY to quit, and
information window. After 4 second, it will go to the
City-Date-Time Mode.
PERSONALIZED A PLACE NAME
• Press and Hold [ SET ] for 3 second. In the information
window,
] or [ ] key to select
[ ] key to select the country. Let's said you have
selected the country Germany which is represented in
will
• Press [ SET ] key to confirm the Country (let's said we
select Germany right now), and then the information
window will show
will shown at the
• Then, press [
city name will be shown in the information window
such as
am Main', and you would like to enter a new city which
is near the region of Frankfurt am Main.
• Press the 'MEM' key ; a cursor flashes on the first
position of the Information Window
Then following input commands then apply:
] or
KEY
[ ] or [ ]
[ / ] 
SET
is
] or
means
.
TEST
] or [ ] key to select
will shown at the
is shown, and then press [ ] or
.
.
] or [ ] key to select the city, and the
means the city 'Frankfurt
Function
Selection of a letter
<1> Accept the selected
letter and jumps to
the next position.
OR
<2> If you have not
entered any letter
(in other words, if
only the cursor is
flashing at the last
position), confirm the
entry with this key and
your place will also
be included in the
memory with
immediate effect
One position back in the
data entry process.
35