Operation Of The Appliance; Energy Efficient Usage; Replacing The Lamps; Operating The Hood - Beko HCA63640B Bedienungsanleitung

3

Operation of the appliance

3.1 Controlling the Appliance
A B
KEY FUNCTION
A : 1. Stage You can start your hood at speed lev-
Button
el 1 by pressing this key. When you
press this key again to switch off the
appliance, speed level indication on
the display disappears.
B : 2. Stage
You can start your hood at speed level
Button 2 by pressing this key. When you press
this key again to switch off the appli-
ance, speed level indication on the
display disappears.
C : 3rd Stage
You can start your hood at speed level
Button 3 by pressing this key. When you press
this key again to switch off the appli-
ance, speed level indication on the
display disappears.
D : Light On / Off You can illuminate the cooking area by
pressing this key.

3.2 Energy efficient usage

• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.

3.3 Operating the hood

• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
10 / EN
C D
• You can start your appliance by pressing on the
desired speed setting button. (A, B, C).
• You may illuminate the cooking area by pressing
the lamp (D).
3.4 Auto-stop in 15 min.
This appliance is equipped with an Auto-Stop
function which allows the appliance to ventilate
the room for an additional period of time in order
to remove the unpleasant odour and vapour in the
room after the cooking is over. Appliance stops au-
tomatically after a certain period of time. To ena-
ble the Auto-stop function, press any of the speed
level keys (A, B, C) on the control for longer than 2
seconds. A timer with 15 minutes will be activated.
If you press the same speed level key while the
Auto-stop function is enabled, function will be dis-
abled and the appliance will stop. If you select a
different speed level this function will be disabled.
If you want your appliance to stop automatically,
you must enable the Auto-stop function again.
Periodical cleaning of metal filters
Filters must be cleaned at about every 60 hours of
operation or 4 weeks depending on the frequency
of usage.

3.5 Replacing the lamps

MAX 3 W
Cooker Hood / User Manual