Specifications - Panasonic EY3552 Bedienungsanleitung

VI
. ACCESSORIES
WARNING
•The use of any accessories not specified in
this manual may result in fire, electric shock,
or personal injury. Use recommended acces-
sories only.
•Use of a blade on material that is thicker or
thinner than that recommended for that blade
will result in a rough cut, and could increase
the risk of "kickback" or other injury.
Blade for cutting metal material
•EY9PM17A
For cutting unhardened ferrous material
Thickness of material
0.3 mm - 6.0 mm (1/64" - 15/64")
VII

.SPECIFICATIONS

Metal Cutter (EY3552)
Motor voltage
Blade Speed
Blade Size
Outside diameter
Arbor size
Maximum cutting depth
Dimensions (L × W × H)
Weight (with battery pack)
Battery Pack (EY9251)
Storage Battery
Voltage
Battery Charger (EY0110)
Model
Electrical rating
Weight
Charging time
NOTE:
• Do not charge "Y" type Ni-Cd battery packs.
• For applicable battery packs to this charger, see the label on the charger or the latest general
catalog.
Blade for cutting thin metal material (Optional
accessory)
•EY9PM17B
For cutting unhardened thin ferrous material
Thickness of material
0.3 mm - 2.0 mm (1/64" - 5/64")
Rip Fence (Optional accessory)
•EY3500B7727
For convenience of rip cuts and repeated cut of
uniform width
Battery Pack
•EY9251
Battery Charger
•EY0110
18 V DC
2900 /min (rpm)
165 mm (6-1/2")
20 mm (25/32")
3 - 56 mm (1/8" - 2-13/64") ( φ 165mm blade)
345 × 198 × 264 mm
(13-37/64" × 7-51/64" × 10-25/64")
4 kg (8.82lbs)
Ni-MH Battery
18 V DC (1.2 V × 15 cells)
EY0110
See the rating plate on the bottom of the charger.
0.78 kg (1.72 lbs)
65 minutes (EY9251)
- 16 -