Jimmy H10 Pro Bedienungsanleitung Seite 9

2.Charge the battery on machine: lug one end of
charger to battery pack connector and another
end of charger to power socket to charge the battery
when battery pack is assembled in the vacuum
cleaner. Machine LCD screen will show battery
power percentage. When charging is completed it
will show 100% as the pictures shows.
Attention:
1.When battery power is below ≤20%, machine will have
voice reminding. If machine is working in Max mode
in this status, it will change to Eco mode automatically.
When battery power runs off, machine will turn off after
LCD screen and voices reminds.
2.If vacuum cleaner is long idled, charge the battery every
three months to avoid battery failure.
Use of handheld vacuum and LCD screen
contents
Take the vacuum cleaner off the storage holder,
press the on/off button to start or stop the vacuum
cleaner. Mode button can adjust working mode.
When machine is turned on, it works in Auto mode,
press the mode button to switch to the sequence
of Turbo- Max - Eco-Auto mode. During mode
switch the mode will be displayed in LCD screen
and there is voice reminding.
Middle of LCD screen displays product run time
left in current mode. When mode is changed, left
run time will also change accordingly.
When product works in Max mode and battery
power drops below 20%, to extend product run time, product will automatically switch from Max
to Eco mode. After battery is charged to higher than 20% power, product can work in Max mode.
When the product is working in Auto mode, it will adjust working power basing on the dust
content and the floor type it detects, in order to achieve higher cleaning efficiency. Under Auto
mode, LCD screen display Auto regardless how high the working power is.
5
7
On/off button
Mode button
LCD screen
8
6
6
7