Zodiac PRO 500 Eignerhandbuch Seite 27

1-4-3-Lifting
To lift your boat:
You can use a 4-wire sling obtainable from your Zodiac dealer.
To carry out this operation you have to:
a- Remove the aft chain plates and refit them with the ring reversed (facing forward).
b- Fit the bow of the boat with 2 additional chain plates (contact your ZODIAC
dealer). The diagram below shows the areas where the fore chain plates are located
(distances in millimetres).
All these fittings must be made watertight using Sikaflex.
DESCRIPTION - Handling
Page 10 of 17
Stiffener area
200 x 200 mm