Switching The Hob On/Off; Pot Detection - Blaupunkt 5IX60290 Bedienungsanleitung

SWITCHING THE HOB ON/OFF

First switch on the hob and then the cooking zone.
Hob: switch on/switch off:
Operation
Switch on
Switch off
Switch cooking zone on/off:
Operation
Increase power
Switch off
If no further input is made, the hob will switch off after approx. 20 seconds for safety reasons.

POT DETECTION

For greater comfort and simplicity, this hob is equipped with a control system.
Switch on the hob and place a pot on the hob. The intuitive operation will automatically detect the
pot or will display the [ 0 ] symbol above the Smart Slider to be used. You can now adjust the
cooking level as desired. The pot detection feature ensures complete safety.
The induction system will not work:
• If there is no cookware on the cooking zone or if a pot unsuitable for induction is used. In this
event, the power level cannot be increased and the [ U ] symbol will appear on the display.
The [ U ] will disappear when a pot is placed on the cooking zone.
• If the pot is removed from the cooking zone during cooking, the cooking zone will
immediately switch off and the [ U ] sign will appear in the display. The [ U ] will disappear
when a pot is placed back on the cooking zone. The cooking zone then resumes at the
previously set power level.
After use, switch off the cooking zone so that the [ U ] symbol no longer appears in the
display.
Operating panel
Press [ ] for 2 sec.
Press [ ] for 2 sec.
Operating panel
Slide your finger over the
Smart Slider
Slide your finger over the
Smart Slider
11
Display
Press [ 0 ]
None or [ H ]
Display
[ 1 ] to [ P ]
[ 0 ] or [ H ]