Silent Key - Olimpia splendid Unico Air Hinweise Für Die Verwendung Und Pflege

• As the room temperature nears the setting, fan speed is reduced automatically.
• In dehumidification mode, it is not possible to control the speed as the appliance
can only operate exclusively at low speed.

3.5.11 - SILENT key

• To activate this mode, press the B3 key on the remote control, the D6 symbol
appears on the display.
• Activating the night function (SILENT) allows you to obtain multiple results:
- gradual increase in the set temperature during cooling mode
- gradual decrease in the set temperature for heating (HP versions only)
- reduction of the sound level of the appliance
- savings on nightly electricity consumption
• To activate the night function, it is necessary to select the operating mode and
the desired temperature first, then press key B3 to activate it.
• Ideally, the activation of the night key should be done immediately before falling
asleep.
• In cooling mode, the set temperature is maintained for an hour after activating the
night key.
In the following two hours the setting is gradually increased, while the fan operation
is set to low speed.
• After the second hour, the temperature setting and the fan setting are not further
altered.
• In heating, the set temperature is maintained for an hour after activating the night
key.
Over the next two hours, the setting is gradually lowered, while the fan operation
is set to low speed.
• After the second hour, the temperature setting and the fan setting are not further
altered.
• The night key is not available for operation in dehumidification and ventilation only.
• The night key can be disabled at any time (ideally upon awakening) by pressing
button B3 once more.
• At this point, the fan temperature and speed settings that were set before activating
this function are restored.
EN - 31
UNICO AIR ON/OFF