Faqs - HBM PMX Bedienungsanleitung

Troubleshooting

13.2 FAQs

Does the PMX have any fuses that need changing?

No. The PMX has an internal current limiter to automatically regulate the
power consumption in the event of a fault.
Are there any moving parts that would have to be maintained?

No. The PMX manages without fans and the like, and is maintenance free.
Are the plugs protected to prevent mix-ups?

At the time of delivery, no. But you can use the enclosed coding pins to
integrate coding/prevent mix-ups.
What connector options are available?

The standard multipoint connectors supplied are "push-in" terminals, and
can also be ordered as screw-on plug terminals.
What are the options for adjusting the amplifiers?

There are 3 options: 1. Enter the sensor values (zero point/span) as a
numerical value, 2. Measure the sensor values, 3. Load and automatically
set the TEDS (Transducer Electronic Datasheet) sensor values from the
TEDS chip in the PMX amplifier.
What are the options for connecting the PMX to a web server?

1. A direct 1:1 connection via Ethernet. 2. An Ethernet connection via a
network.
Do I have to install operating software?

No. PMX has an internal web server for parameterization. All that you need
on your PC is an Explorer, Windows Internet Explorer (Version 9 or later),
Firefox or Google Chrome. You also have the option to use HBM's
"Catman" software for recording and data analysis.
Can the PMX web browser be displayed directly after switch on (full screen

mode)?
Yes, e.g. with the FireFox browser. To do this, open the FireFox profile
manager. Then create and start a new profile "Fullscreen".
Under the settings → General, set the start page, e.g.
"pmx.local?deviceoverview=off".
Switch the browser into the full screen mode with F11 and zoom with
CTRL+mouse wheel or exit with Alt F4.
The browser can now be started in full screen mode with
"Firefox-P-Fullscreen".
It is recommended that FireFox is selected as the standard browser and a
start icon created. This can then be stored in the Autostart file.
A3257−2.0 en/de/fr
157