Starting Up - Carimali C 64 A-M Bedienungsanleitung

 Remove the coffee beans hopper lid ( A ) and pour coffee beans into the hopper.
A
B
 Switch on the device by the main switch ( H in I position): the built-in light signals the grinder is powered up and running.
 Push the indexing pointer ( B ) and turn the adjusting ring nut ( C ) clockwise to tighten the burrs and obtain a finer
grinding. Turn the ring nut anti-clockwise ( D ) to loosen the burrs and obtain a coarser grinding.
 Grinder C 64 A
The grinder stop and restart will automatically due to a level measuring built into the ground hopper, to interrupt the grinding
at an intermediate stage act on the main switch ( H ).
 Grinder C 64 M
To stop and restart the grinding use the main switch ( H ), positioning it to ON or OFF.
PLEASE NOTE:
 The equipment is provided with a internal protection device to prevent motor overheating. If overheating occurs,
wait for the motor to cool down. In any case make sure that overheating is not caused by external heating
sources.
 Every grinding setting must be done while grinding.
LB.05058-07

STARTING UP

K
I
E
G
H
Pag. 12
C
D
F
24/11/16