Working With The Unit; Control Panel Description - FROMM & STARCK STAR ATFE 12 Bedienungsanleitung

XVI. The length of the crossbeam should not exceed the position of the end
opening.
XVII. Method no. 1 (W1) in step 6-A applies also to the assembly of the cable tray
(9).

3.3. Working with the unit

Height adjustment:
1. Connect the plug to a power outlet.
2. Use the buttons on the control panel to adjust the height.

CONTROL PANEL DESCRIPTION:

There are 7 buttons on the control panel:
▲ : up height adjustment button
▼ : down height adjustment button
1 : button of the first height saved by the user
2 : button of the second height saved by the user
3 : button for the third height saved by the user
M : height memory button
A : button to set an alarm reminding the user to change the position
Control panel operation:
• Height adjustment function:
The height can be adjusted with ▲ or ▼ buttons. The current height is shown
on the LED display.
• Height memory function:
a. By pressing ▲ or ▼ you can set the desired height. To memorize the height,
press M – S- will be displayed on the screen. When you press 1, 2 or 3, a
height will be assigned to the pressed button and S-1, S-2 or S-3 will be
displayed respectively.
b. By pressing 1, 2 or 3 the stored height will be automatically set.
LD - LED display board