1. SERVIZIO TECNICO (TECHNICAL SERVICE)
It is essential for this instruction manual to be stored together with the appliance for future referencing;
in the event of misplacing it, a copy must be obtained directly from the manufacturer.
This information has been prepared for your safety and that of others; therefore we kindly ask you to
read it carefully before installing and using the appliance.
For periodic maintenance checks and repairs, contact your nearest Technical Support Centre and only
use original spare parts. Failure to comply with this provision shall forfeit the warranty right.
All installation and commissioning operations must exclusively be performed by technically skilled
installers, in compliance with the instructions of the Manufacturer and in compliance with national
standards in force.
The "technical data" plate is located on the side panel of the appliance.
Note: The inappropriate or incorrect use of the appliance and failure to comply with installation rules shall
invalidate any liability by the Manufacturer.
2. INSTRUCTIONS FOR THE USER
2.1 Control panel
Programming cooking time - The oven is switched on by turning the programmer knob (Fig.1) to
the
symbol (continuous operation) or to the selected cooking time (up to 120 minutes); in the
latter case the end of cooking is signalled by the oven switching off automatically.
Fig.1
"End of cooking"
programmer
warning light
"End of cooking"
programmer knob
Adjustment
thermostat
warning light
Thermostat control
knob
Automatic
humidifier warning
light
Automatic
humidifier knob
4